Your cart

C.O.M.B.O. Customization

Learn more about C.O.M.B.O. parts, disassembly, and customization!

Parts & Modularity

C.O.M.B.O. Buttons (CBs) are composed of four main parts: the Ring, the Plunger, the Optimizer, and the Well.

Each part of the CB is modular with other CBs and C.O.M.B.O. Extensions.

  • Ring
    • This locks onto the top of the C.O.M.B.O. Button and keeps all of the parts together.
  • Plunger
    • Composed of two parts: the Plunger and the Cap.
    • The Plunger allows for different actuation points, which we call speeds: Classic (1.0mm), Super (0.5mm), and Ultra (0.3mm).
    • The Cap can disconnect from the Plunger. This allows any C.O.M.B.O. Button to install a clear Cap to showcase custom art. Similarly, swapping the default Cap with Caps of other colors will completely change the button's look.
  • Optimizer
    • The Optimizer (OP) silences and shortens the total travel distance of your buttons press.
    • The are three OP options: Classic (1.5mm), Super (1.0mm), and Ultra (0.65mm).
  • Well
    • The Well holds the other parts within it.
    • The Cherry MX Low Profile Speed Silver is installed onto the bottom of the Well.

Back to the top

Customization

Open the C.O.M.B.O. 

Grip the Ring of the C.O.M.B.O. by one of the notches and then rotate it counter-clockwise to unlock it from the Well. Push down on the Plunger to help stabilize the Well and prevent it from rotating with it. 

Remove the Rim from the Well, then remove the Plunger from the Well.


Remove the Cap
Find the gap in the Cap to use as leverage to remove the Cap.

Remove the Optimizer


Swapping Parts
You can switch parts with other C.O.M.B.O.s to get custom color combinations.
You can also install art!


Lock the C.O.M.B.O.
Insert the Ring back into the Well, then rotate it clockwise to lock the C.O.M.B.O. together. Push down on the Plunger to help stabilize the Well and prevent it from rotating with it. 


Video Guide

Below is a timestamp from our C.O.M.B.O. Overview and Install video. This portion of the video is a general overview of the disassembly and customization process of the C.O.M.B.O. which may help you with your art installation process.

If the embed does not work properly, use this URL: https://youtu.be/VB0IF9WKFb8?si=UZZ4WxBGILy-Wfyu&t=89

 

 

Back to the top

Explore more C.O.M.B.O." and, if you have any questions, please join our community on Discord and visit the #combo-extension channel.

English